Blog - PROSTECH

Home » Blog

How PTFE Roller Wrap Tape Cut Hidden Labor Cost

Roller cleaning labor hours on a PE extrusion coating line are driven less by how often a roller needs cleaning

Eliminate PE Contamination on Nip Rollers by PTFE Tape

Molten polyethylene bonds to a nip roller because most engineering surfaces have enough surface energy for PE to wet and

ISO 10993-5 Compliant Cyanoacrylate Adhesive: Bonded vs Coating

When engineers search for an ISO 10993-5 compliant cyanoacrylate adhesive, most assume that “ISO 10993-5 compliant” is a single checkbox

Metal-to-Plastic Bonding Adhesive for EV Lightweighting

Metal and plastic composites are increasingly bonded together in the same EV assembly to cut weight, but the two materials

PFAS-Free, Hydrophobic Coatings for Glass: A New Standard for Anti-Fingerprint Performance

Interest in PFAS-free alternatives is growing across the materials and electronics industry, as manufacturers evaluate surface protection options that

SilFORT TAC2000: Solving Condensation and Fogging in Automotive Applications

Polycarbonate (PC) is now the default material for automotive headlamp lenses, ADAS sensor covers, and front-end modules. It is lighter

Material Selection for Mitigating Optical Degradation in Aerospace Manufacturing

In aerospace manufacturing, the long-term integrity of optical systems depends critically on adhesive chemistry. Molecular contamination from outgassing materials —

Comprehensive Die Cut Tape Services for Manufacturing

Prostech provides comprehensive die cut tape services to bridge the technical gap between raw industrial tapes in master rolls and

Impregnation to Protect Stator in Wind Power

Discover why stator impregnation is a highly recommended protection method in wind power manufacturing. Lightweight, superior insulation, and optimized thermal

Why Camera Module Assembly Needs Dual-Cure Adhesives

In high-precision electronics manufacturing, achieving perfect optical clarity while maintaining high throughput is a constant struggle. This precision is often

Conquer the Pump-Out Effect with Advanced TIMs

In the high-stakes arena of Electric Vehicle (EV) manufacturing, thermal management is the boundary between peak performance and catastrophic failure.

rapid, UV-resistant encapsulation of Low Pressure Molding.

Low Pressure Molding vs. Potting for Protection in the Rail Industry

Discover the differences between Low Pressure Molding (LPM) vs. Potting for protection in the Rail Industry to understand why modern