Devcon DV14250 5 Minute Epoxy: In need of a quick and durable fix for your pipe infrastructure? Devcon 5 Minute Epoxy is your go-to solution for all repair and maintenance tasks. This fast-acting epoxy hardener offers a general-purpose adhesive that dispenses and mixes in seconds, providing efficient gap filling for a variety of uses. It dries in just 15 minutes and reaches full strength in an hour, making it perfect for urgent repairs. Our 5-minute, 2-part epoxy is both strong and resilient, ensuring long-lasting protection for your pipes against wear and damage. Protect your infrastructure with Devcon 5 Minute Epoxy and experience its exceptional bonding strength and flexibility today!
Product Description
Devcon® 5 Minute® Epoxy 14250 is a rapid-curing, general purpose adhesive/encapsulant. It can bond well metals, fabrics, ceramics, glass, wood, and concrete (in combinations), 50 ml cartridge.
There is a wide range of sizes available, each with a specific part number as listed below:
14210 2.5 oz.
14630 9 lb.
DA051 400 ml cartridge
14250 25 ml Dev-Tube™
14200 15 oz.
Features of Devcon 5 Minute Epoxy 14250
Devcon® 5 Minute® Epoxy has key features as the following:
- Bonds rigid durable substrates such as metals, glass, ceramics, concrete and wood in all combinations
- Forms a clear hard rigid bond self leveling liquid in minutes
- Listed under NSN Stock#8040-00-264-6816:#8040-01-067-6126
- Functional strength in 1 hour
- 100% reactive, no solvents
- Low viscosity (10,000 cps)
- Open Time: 4-7 minutes
- Fixture Time: 10-15 minutes
- Color: Clear
- Mix Ratio: 1:1
- Working Time Min: 3
- Working Time Max: 6
- Fixture Time Min: 10
- Fixture Time Max: 15
Application Instructions for Devcon 5 Minute Epoxy 14250
- Apply mixed epoxy directly to one surface in an even film or as a bead.
- Assemble with mating part within recommended working time.
- Apply firm pressure between mating parts to minimize any gap and ensure good contact (a small fillet of epoxy should flow out the
edges to display adequate gap fill.
About ITW Performance Polymers
ITW Performance Polymers is a global leader in the research, development, and manufacture of structural and semi-structural adhesives, grouting and chocking compounds, sprayable syntactic materials, and wear-resistant coatings and repair compounds. Their market-leading brands include:
- Chockfast: Grouting and chocking compounds
- Densit: Wear-resistant coating and grouting systems
- Devcon: Wear-resistant coating and MRO solutions
- Epocast: Chocking compounds
- Insulcast: Potting and encapsulation solutions
- Korrobond: Backing compounds
- Permatex: MRO solutions
- Plexus: Adhesive solutions
- Spraycore: Sprayable syntactics and specialty products
See All ITW PP Here
| Cured 7 Days @ 75°F (24°C) | Typical Values |
| Adhesive Lap Shear (GBS) | 1,900 psi (13.1 MPa) |
| Dielectric Strength | 490 volts/mil (19.3 kV/mm) |
| Hardness | 85 Shore D |
| Impact Resistance | 5.5 ft-lb/in² (11.56 kj/m²) |
| Service Temperature | Dry -40°F – 200°F (-40°C – 93°C) |
| Solids by Volume | 100% |
| Specific Volume | 25.1 in³/lb. (0.99 cm³/g) |
| Tensile Elongation | 1% |
| T-Peel | 2-3 pli (0.35-0.53 N/mm) |
| Uncured Properties @ 72°F (23°C) | |
| Color | Light Amber |
| Working Time | 3-6 mins |
| Fixture Time | 10-15 mins |
| Functional Cure | 0.75-1 hour |
| Full Cure | 12 hours |
| Mix Ratio by Volume | 1:1 |
| Mix Ratio by Weight | 1:1 |
| Mixed Density | 9.17 lb/gal (1.10 g/cm³) |
| Mixed Viscosity | 9,000-11,000 cP |
