Home > Products > By Application > Adhesives > Structural Adhesive > Acrylic Structural Adhesive > Plexus® PU2105 Two-part Polyurethane Adhesive
Plexus® PU2105 Two-part Polyurethane Adhesive Prostech Vietnam

Plexus® PU2105 Two-part Polyurethane Adhesive

  • Product code: PU2105
  • Manufacturer: ITW Performance Polymers
  • Package size:
  • Shelf Life: Bulk Containers, unopened: 18 months; Cartridges, unopened: 10 months
Request Quote Request Sample

Plexus® PU2105 is a high strength two-part structural polyurethane adhesive that forms rigid connections with a variety of substrates. It is designed for bonding composites, (FRP, epoxy, etc.) thermoplastics, metals, wood, concrete, and cement. Combined at a 1:1 ratio, PU2015 has a working time of 3 to 5 minutes. The product has low exotherm and no odor. This product offers a combination of high strength and stiffness as well as the ability to bond a wide range of materials. Plexus PU2105 is supplied in ready-to-use and 400-ml cartridges, or 48-gallon (182-liter) drums to be dispensed as a non-sagging gel.

Key Features

  • Excellent environmental resistance
  • Excellent gap filling and thixotropic
  • Easy to use 1:1 ratio
  • Low print Low exotherm and low shrink

Key Substrates

  • Composites DCPD, FRP, Gelcoat, Phenolics, Epoxy Based Composites, RIM
  • Coated metals Powder coated or E-coated Metals
  • Thermoplastics PC-PET Blend, ASA Blends, PMMA, Noryl
  • Raw metals Aluminum, Stainless Steel, Raw Steel, etc.
Typical Properties*
Mix ratio by weight100:159
Mix ratio by volume1:1
Adhesive Part A density, g/ml1.23
Hardener Part B density, g/ml1.95
Mixed density, g/ml1.57
Adhesive Part A viscosity(92#, 20rpm, 25℃), cP74,000
Adhesive Part B viscosity(92#, 20rpm, 25℃), cP68,000
Working time(25℃), mins3~4
Handling time, (50 psi) / 0.35 to 1 MPa (20°C), Mins.25-30
Curing time to reach 500 psi / 3.5 MPa (20°C), Hrs.115
Time to reach Max Exo Temp. (10 gm, 75F/24C), Mins.6.5
Typical Exo. Peak Temp. (10 gm, 75F/24C), F/C140 / 60
Lap Shear on Al 6061, PSI / MPa (0.012 in./0.3 mm)1,450 / 10.0 (CF)
Tensile strength, PSI / MPa4,060 / 28
Elongation at break, %5
VOC, % by wt.0
Hardness, Shore D / A70 / NA
Shelf Life, months (stored between 50 to 75°F (10 to 24℃) 
– Bulk Containers, unopened18
– Cartridges, unopened10

 

TDS:Download

Get MSDS

    Leave your information via Form, our Technical Support Team will contact you shortly!

    Why Camera Module Assembly Needs Dual-Cure Adhesives
    Why Camera Module Assembly Needs Dual-Cure Adhesives 
    https://prostech.vn/why-camera-module-assembly-needs-dual-cure-adhesives/

    1. Active Alignment: The Core Reason for Dual-Cure in Camera Bonding2. Why ADAS Camera Modules Are Particularly Affected by Shadow

    ULTRACUT® EVO 280 – Biocide-Free Aluminium Cutting Fluid
    https://prostech.vn/ultracut-evo-280-biocide-free-aluminium-cutting-fluid/

    General DescriptionKey FeaturesFAQ SectionWhat is ULTRACUT EVO 280?Why use a dedicated aluminium cutting fluid like EVO 280?What is the dilution

    ULTRACUT® EVO 260 – Maximum EP Biocide-Free Cutting Fluid
    https://prostech.vn/ultracut-evo-260-maximum-ep-biocide-free-cutting-fluid/

    General DescriptionKey FeaturesFAQ SectionWhat is ULTRACUT EVO 260?How does EVO 260 differ from EVO 255?Can ULTRACUT EVO 260 be used

    ULTRACUT® EVO 255 – Extreme Pressure Long Life Cutting Fluid
    https://prostech.vn/ultracut-evo-255-extreme-pressure-long-life-cutting-fluid/

    Key FeaturesFAQ SectionWhat is ULTRACUT EVO 255?How does ULTRACUT EVO 255 differ from EVO 250?What is the dilution ratio of