Plexus® MA2245 is a two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. Combined at a 10:1 ratio, Plexus MA2245 is an excellent choice for composite bonding applications in the marine and transportation industries because it requires virtually no surface preparation and can fill Gaps from 0.03 inches to 1.5 inches* (final Gap fill is dependent on laminate thickness and composition). In addition, this product provides a unique combination of excellent fatigue endurance, outstanding impact resistance, and superior toughness. Plexus MA2245 is available in blue or black colors and is supplied in ready-to-use 490-ml cartridges, 5-gallon (20-liter) pails, or 50-gallon (200-liter) drums to be dispensed as a non-sagging gel.
Key Features
- Working time 40 – 45 mins
- Extremely low exotherm
- Highly thixotropic with an ability dispense large non-sag beads
- Low shrink technology
Key Substrates
- Composites DCPD, FRP, Gelcoat, Phenolics, Epoxy Based Composites, RIM
- Thermoplastics ABS/ ABS Blends, Acrylics, PBT, Polycarbonate, Rigid PVC, TPUs
- Coated Metals Powder coated or E-coated Metals
- Raw Metals with PC120 Aluminum, Stainless Steel, Raw Steel, etc.
Typical Uncured Properties | Part A | Part B |
Color | Off-White | Black |
Mix Ratio By Volume | 10 | 1 |
Mix Ratio By Weight | 9.40 | 1.00 |
Component Density, g/ml | 0.99 | 1.07 |
Component Viscosity, cP x1000 | 190 – 250 | 35 – 70 |
VOC’s during cure, % | < 1 | |
Shelf Life, Months | 12 / 7 |