Plexus® MA2045 is a two-part methacrylate adhesive designed for structural bonding of composite, thermoplastic, and metal assemblies. MA2045 was uniquely formulated to eliminate problems associated with adhesive sag and slide, even when applied to a vertical surface. In addition, MA2045 does not boil in gaps up to 1.5 inches thick. Combined at a 10:1 ratio at 75°F (24°C), it has a working time of approximately 50 minutes and achieves 500 psi and 1000 psi in approximately 100 and 130 minutes, respectively. As with most other Plexus methacrylate systems, MA2045 requires little-to-no surface preparation. MA2045 provides a unique combination of excellent fatigue endurance, outstanding impact resistance, and superior toughness. MA2045 is supplied in 380-ml cartridges, 5-gallon (20-liter) pails, or 50-gallon (200-liter) drums to be dispensed as a non-sagging gel.
Key Features
- Working time 40-45 mins
- Fast, consistent strength development at room temperature
- Highly thixotropic with an ability dispense large non-sag beads
- High strength and high elongation
Key Substrates
- Composites DCPD, FRP, Gelcoat, Phenolics, Epoxy Based Composites, RIM
- Thermoplastics ABS/ ABS Blends, Acrylics, PBT, Polycarbonate, Rigid PVC, TPUs
- Coated Metals Powder coated or E-coated Metals
- Raw Metals with PC120 Aluminum, Stainless Steel, Raw Steel, etc.
Typical Uncured Properties | Part A | Part B |
Color | Off-White | Blue/Black |
Mix Ratio by Volume | 10 | 1 |
Mix Ratio by Weight | 8.83 | 1.0 |
Component Density, g/ml | 0.94 | 1.07 |
Component Viscosity, cP x1000 | 180 – 220 | 35 – 70 |
VOC’s during cure, % | < 1 | |
Shelf Life, Months | 10 |