PERMABOND® 200 Cyanoacrylate

PERMABOND 200 is a high viscosity product with good flow control useful in wire tacking applications or bonding components. It is fast setting and suitable for use on plastics, rubber and metals.
Cyanoacrylate adhesives are single component adhesives that polymerize rapidly when pressed into a thin film between parts. The moisture adsorbed on the surface initiates the curing of the adhesive. Strong bonds are developed extremely fast and on a great variety of materials. These properties make PERMABOND cyanoacrylates the ideal adhesives for high speed production lines.

FEATURES:

Fast setting and fixturing of parts
Rapid development of high strength
Ease of use-no mixing, no heat cure
Bonds most materials
100% reactive, no solvents

APPLICATIONS:

Use on plastics, rubber and metals

Physical Properties of Uncured Adhesive

Chemical composition	Ethyl cyanoacrylate
Appearance	Colourless
Viscosity @ 25°C	1500
Specific gravity	1.05

Typical Curing Properties

Maximum gap fill	0.015 (0.38)
Fixture / handling time* (0.3 N/mm² shear strength is achieved)	15 seconds (Steel) 15 seconds (Buna N Rubber) 15 seconds (Phenolic)
Full strength	24 hours

Typical Performance of Cured Adhesive

Shear strength (ISO4587)

Grit blasted steel 3200 (22)

Aluminum 1200 (8.3)

Impact strength (ASTM D-950)

3-7 kJ/m² (1.4-2.4 ft-lb/in²

Dielectric constant @10kHz

2.5