The Dymax UVC-8 Conveyor is designed for curing UV/Visible light-curable adhesives, coatings, and inks. This cost-efficient and versatile conveyor system is perfect for both production and lab environments, and can be used in a number of different industries. Typical substrates that are bonded, coated, or encapsulated include paper, plastic, metal, glass, laminated materials, printed circuit boards, and many others.
Features:
Fast cures for higher throughput – intensity up to 800 mW/cm2
Controlled and consistent cure times
Adjustable lamp-to-belt distance to accomidate various part heights
Dependable, heavy-duty conveyor design with fully shielded lamp enclosures
Digital control panel, compact PLC
Optional intensity adjustment (40-100%)
Optional dichronic lamp reflectors and IR filters for curing on temperature-sensitive substrates are available
The UVC-8 Conveyor is equipped with a 220-mm wide Teflon®-coated belt and can be outfitted with one, two, or three UV lamps. The distance between the lamp and the belt can be manually adjusted (between 60-100 mm) as well as the belt speed (0.5-12 m/min). This enables the operator to tailor the curing conditions to the specific application. The conveyor also features a digital control panel where various parameters such as operating hours, lamp current, and the UV set point can be monitored.
SPECIFICATIONS
Electrical Requirements
3 x 400V/N/PE, 50 Hz
Number of Lamps
1, 2, or 3 UV lamps
Lamp Power
2000 W per bulb
Intensity (UVA)
800 mW/cm2 (typical Intensity new bulb at 60 mm distance)*
Vertical Clearance
Adjustable 60-100 mm
Dimensions (W x L x H)
1,100 mm x 1,000 mm x 1,200 mm
Working Height (Floor to Belt)
900 mm on wheel kit or 900 – 950 mm with adjustable screws
