COVEN FP4000 is a low-temperature, heat transfer fluid for cooling reactors and the perfect alternative solution for 3M Novec 7100 & 3M FLUORINERT FC 72.
COVEN FP4000 is featured by its dielectric heat transferring ability, dedicated to 1-phase or 2-phase immersion or direct cooling systems. It’s high electrical insulation properties allow it to immerse electronics & electrical devices under power in the fluid. The favorable characteristics of the product’s viscosity, density, and surface tension allow optimal surface contact, which contributes to a superior heat transfer performance.
COVEN FP4000 is formulated with safety in mind. It is non-toxic, has no mentioning of any EUH phrases, is non-flammable, and has no flash point. It also has fire extinguishing properties, which provide extra protection in case of fire.
FEATURES
- Low Global Warming Potential
- Excellent dielectric properties
- Non-ozone depleting
- Low toxicity
- Non-flammable
- Non-corrosive
- Good thermal stability
- Useful at extremely low temperatures (to -120 Degrees C)
- Will not damage electronic equipment in the event of leakage or other equipment failure
| 3M Novec 7100 cooling | COVEN FP4000 |
Appearance | clear | clear |
Molecular wt. | 250 | 250 |
Boiling point | 610C | 610C |
Freeze Point | -1350C | -1350C |
Density (g/ml) | 1.52 | 1.52 |
Surface Tension (dynes/cm) | 13.6 | 13.6 |
Vapor Pressure (mmHg) | 202 | 27 kPa = 202.5 mmHg |
Heat of Vaporization (kJ/kg) | 112 | 112 |
Dielectric Strength/constant | > 25 kV/ 7.4@1KHz | > 25 kV/ 7.4@1KHz |
Volume resistivity | 108 Ohm-cm | 108 Ohm-cm |
Temperature Range | -105 ~ 500C | -105 ~ 500C |
ODP | 0 | 0 |
GWP | 320 | 320 |
Flash Point | no | no |
