This 5-series controller has the same function as TAD-200S/TAD-200V and it is suitable when a robot is used.
- High quality with the functions; minimal amount dispensation control, high-speed work, and automatic dispensation and automatic stop by the interval work.
- Vacuum control stops liquids from flowing after dispensation finishes.
- Varied output functions facilities automation and interface.
- The Digital timer displayed on LED in manual mode makes it easy to set time.
- Memory the values for dispensing until you set the values again.
- It is suitable for narrow spaces or automation lines as it has as many functions as five controllers have.
Applied materials
- Silicone, UV resin, Cream solder, Silver paste, Epoxy, Bond,etc.
SPECIFICATION
| Model | TAD-5000S / TAD-5000V |
| Control method | Electronic / Pneumatic system |
| Dispensing pressure | 0~10kg/㎠(S:Standard), 0~4kg/㎠(L:Option), 0~2kg/㎠(P:Option) |
| Time range | 0.01~99.99sec |
| Interval timer | 0.01 ~ 3.99 sec, 0.01 ~ 05.99 min |
| Dispensing time | 0.01 sec ~ 5.99 sec |
| Out signal | Open connector, DC 24V 20mmsec(Relay), 100mmsec(Relay) |
| Power source | AC220V 50/60Hz(AC100V 50/60Hz: Option) |
| Power consumption | 160W |
| External Dimension and Weight | 600(W) X 302(D) X 205(H)mm, 13.5kg |