Dymax ACCU-CAL™ 50 Radiometer - UV Intensity Meter

Dymax ACCU-CAL™ 50 Radiometer – UV Intensity Meter

Product code: ACCU-CAL
Manufacturer: Dymax
Package size:
Shelf Life:

The ACCU-CAL™ 50 radiometer UV intensity meter is a simple-to-operate device that measures UV-A (320-390nm) intensity and dose (energy). Degradation of UV curing bulbs, lightguides, and reflectors can significantly reduce intensity, resulting in incomplete cures.

The ACCU-CAL™ 50 allows operators to validate, monitor, and document a UV curing process. A low intensity measurement signals an operator to replace the bulb, lightguide, or reflector. The ACCU-CAL™ 50 can also be used to confirm that operators are properly shielded from UV exposure.

Measurement range up to 40W/cm2
Only one calibration per year
Durable temperature-resistant sensor
Comes with sturdy carrying case
PTB and NIST traceable

Spectral Sensitivity	320 to 395 nm
Intensity Range	1 mW/cm2 to 40 W/cm2
Resolution	Dose (1 mJ/cm2)
Calibration Period	12 months
Operating Temperature	Optometer: +5 to +40°C
Ranges	Detector: 120°C continuous, Peak 200°C
Measurement Modes	Peak Intensity (mW/cm2 and W/cm2) Dose (J/cm2)
Light Sources	Lightguides (3 mm, 5 mm, and 8 mm) Floods/Conveyors
Power Supply	Two (2) AA batteries
Battery Life	250 hours (automatic shutoff after 1 hour)
Sensor Dimensions	Diameter = 37 mm Thickness = 8 mm Cable Length = 1 M
Meter Dimensions	120 mm (Length) x 65 mm (Width) x 23 mm (Thickness)