TAD-103 Dispensing System is another variation of TAD-102 with an integrated precision valve which helps to remove materials dripping due to remaining pressure after dispensing.
In case of low viscosity, using a valve is necessary to prevent the materials from dripping so as to save cost.
TAD-103 is actually dispensing system for Low Viscosity Materials which is hard to control its flows.
MAIN COMPONENTS:
- Regulator set
- Cartridge holder
- Plunger
- Cartridge
- Valve
- Needle adapter
- Needle
- Dispensing Controller TAD-200V
SPECIFICATIONS OF DISPENSING CONTROLLER
| Model | TAD-200V |
| Control Method | Electronic/ Pneumatic system |
| Dispensing pressure | 0~10kg/cm² (Standard) 0~4kg/cm² (L: Option) 0~2kg/cm² (P: Option) |
| Time range | 0.01 ~ 99.99 sec |
| Interval timer | 0.01 ~ 3.99 sec |
| Out signal | Open connector, DC 24V 20mmsec (Relay), 100mmsec (Relay) |
| Power source | AC220V 50/60Hz (AC100V 50/60Hz: Option) |
| Power comsumption | 32W |
| External Dimension & Weight | 232(W) x 186(D) x 81(H) mm, 2.7kg |