Plexus® HA1410 is a two-component multi-element hybrid elastic adhesive with low viscosity and low modulus. It has good bonding strength and excellent aging resistance.
Plexus® HA1410 can quickly bond a variety of materials (metal, engineering composite materials, glass, etc.) without the primer.
Plexus® HA1410 has fast curing speed and excellent sealing performance with the following functions:
– 100% solid content
– Good insulation performance
– Low modulus and high toughness
– Good weather resistance, high and low-temperature impact resistance (thermal shock), high temperature and humidity resistance (85°C, 85%)
PRODUCT CHARACTERISTICS
| PRODUCT CHARACTERISTICS | |
|---|---|
| Chemical Class | Hybrid |
| Appearance | Black |
| Solids by Volume, % | 100 |
| Shelf life, months | 6 |
TYPICAL PROPERTIES(UNCURED)
| Part A | |
|---|---|
| Appearance | Yellow |
| Density@25 °C, g/cm3 | 1.46 |
| Viscosity@25 °C, Brookfield | |
| Spindle #7, 20 rpm | 14,000 cPs |
| Part B | |
|---|---|
| Appearance | Amber |
| Density@25 °C, g/cm3 | 1.02 |
| Viscosity@25 °C, Brookfield | |
| Spindle #7, 20 rpm | 650 cPs |
| Mixed | |
|---|---|
| Mix ratio by vol(A:B) | 100:10 |
| Mix ratio by mass(A:B) | 100:7 |
| Working time @25°C, mins | 15 |
| Fixture time @25°C, hrs. | 30 |
TYPICAL PROPERTIES(CURED)
Fully Cured Product (7 days @25 oC)
| Density, g/cm3 | 1.42 |
| Shore hardness, ASTM D2240 | 80A |
| Tensile strength, ASTM D412 | 5 MPa |
| Elongation at break, ASTM D412 | 100% |
| Thermal conductivity, ISO22007-2(Hot disk) | 0.5 W/(m·K) |
| Shear strength, aluminum/aluminum, ASTM D1002 | >3.0 MPa |
| Shear strength, PC /PC, ASTM D1002 | >3.0 MPa |
| Working temperature, °C | -40~120 |
| Coefficient of thermal expansion, ISO11358 | 40*10-6 m/(m.K) |
| Dielectric strength, ASTM D149 | 450 volts/mil |
| Dielectric constant, ASTM D150, 1KHz | 4.0 |