PERMABOND® 130 UV is a low-viscosity, solvent-free, light cure cyanoacrylate adhesive. It is developed for applications where fast bonding between opaque substrates and tack-free fillets are needed. The UV light cure facilitates the curing, minimising the blooming effect, and allowing rapid bonding through transparent parts. When used as a UV-curable adhesive or coating, the moisture cure provides polymerisation in small shadow areas.
FEATURES:
- Cures in shadow areas
- Good adhesion to metals and plastics
- Tack-free in seconds using UV torch
- Reduced odour, reduced bloom
- Good open time for accurate alignment
- Transparent in a thin layer
- Excellent environmental resistance
- Low hazard SDS
PHYSICAL PROPERTIES OF UNCURED ADHESIVE
Chemical composition | Ethyl cyanoacrylate |
Appearance | Yellow before cure Clear in a thin bondline |
Viscosity @ 25°C | 200 mPa.s (cP) |
Specific gravity | 1.1 |
TYPICAL CURING PROPERTIES
Open time (moisture cure only [22°C/50% RH]) |
NBR 3s EPDM 20s Stainless steel 30s Mild steel 30s Aluminum 30s Nylon 6 20s ABS 10s PC 40s PMMA 80s PETG 55s |
Tack free time (UV cure)* Spot LED, 150 mW/cm2, 405nm Spot LED, 25mW/cm2, 405nm |
≤1s ≤5s |