Nordson Vulcan Jet™ Dispensing Systems

Product code: Nordson Vulcan Jet

Manufacturer: Nordson

Package size: 254 mm x 191 mm x 203 mm

Shelf Life:

Vulcan Jet series dispensing systems provide an advanced, intelligent dispensing solution with piezo-based jetting technology. Jetting discrete dots of adhesive that can be
overlapped does not require adjustment to the height of the substrate, allowing for precise dispensing into grooves and other challenging geometries.

FEATURES:

  • Non-contact dispensing applies adhesive accurately at high speeds at a maximum 6 mm distance to the substrate
  • Capable of continuous cycles at 330 Hz for ultra-high speed dispensing
  • Smaller mass and advanced design allow applicators to heat up rapidly utilizing a 24V connection
  • Automatic pressure compensation adjusts for changes in adhesive viscosity, keeping dot dispensing consistent over time
  • Adhesive level monitoring
  • Temperature standby/set back
  • Cap safety technology provides cap integrity and stability during times of high internal pressure
  • Accommodates a wide range of hot melt materials, including polyurethane (PUR)

SPECIFICATIONS:

Weight 1.85 kg (4 lb)
Cabinet size: 10 in x 7.5 in x 8 in (254 mm x 191 mm x 203 mm)
Maximum fluid pressure: 3.45 bar (50 psi)
Heater output (setpoint range): 7.8° C to 190° C (100° F to 374° F)
Continuous cycle rate: 100Hz to 333Hz
Ambient temperature range: 0° C to 45° C (32° F to 113° F)

TDS: Download PDF

    MSDS: Fill your information to receive file:





    Contact Me on Zalo