Product Introduction
Momentive SILCOOL™ TIA2101GF is a two-component, soft, thermally conductive silicone gap filler formulated as a liquid-dispensed alternative to pre-fabricated thermal pads. Its non-slumping consistency ensures stable placement, while its fast low-temperature cure enhances process flexibility. After curing, it retains softness to absorb stress from thermal cycling.
Momentive SILCOOL™ TIA2101GF Features
- High thermal conductivity (10.2 W/m·K)
- Fast, low-temperature curing
- Easy-to-use 1:1 mix ratio
- Soft cured material supports stress relief
- Good slump resistance
- Repairable to support rework processes
Momentive SILCOOL™ TIA2101GF Applications
- Thermal interfaces in automotive electronics
- Consumer electronics requiring high thermal performance
- Telecommunications hardware and networking devices
- Industrial electronics with tight thermal requirements
- LED and lighting system heat management
About Prostech
Prostech offers specialty materials (adhesives, tapes, thermal interface materials, insulating materials, sealants, PCB protection materials, …) along with manufacturing solutions. We proudly serve a wide range of industries and are an authorized distributor for leading global manufacturers of industrial materials and equipment. Our product range is designed to deliver customized solutions that address each customer’s unique needs.
With years of experience and a successful project history, we are confident in our ability to provide comprehensive material solutions. These solutions effectively tackle the challenges manufacturers face. To explore our full product catalog, simply click here. Our dedicated team is ready to assist with:
- Provide quotation, sample, TDS/MSDS, and technical consultation
- Testing sample quality and verifying product compatibility in our laboratory
- Customizing material formulas for special applications
- Adapting product sizes, quantities, and packaging to meet specific needs
- Offering expert advice on suitable equipment and automation processes
- Delivering technical training and on-site support for optimal product use
Moreover, Prostech ensures the safe and accurate global delivery of all materials, including “dangerous goods”, in compliance with legal regulations. For personalized technical support or to receive a quotation, please contact us today.
| Property | Value |
|---|---|
| Product Name | SILCOOL™ TIA2101GF |
| Appearance (Part A) | Pink |
| Appearance (Part B) | Pale pink |
| Viscosity*¹ (Part A) | 400 Pa·s |
| Viscosity*¹ (Part B) | 400 Pa·s |
| Viscosity*² (Part A) | 600 Pa·s |
| Viscosity*² (Part B) | 600 Pa·s |
| Mix Ratio by Weight | 1 : 1 |
| Mixed Viscosity*¹ | 400 Pa·s |
| Mixed Viscosity*² | 600 Pa·s |
| Thixo Index | 1.6 |
| Work Life @ 23°C | 1 hour |
| Cure @ 70°C | 1 hour |
| Cure @ 23°C | 24 hours |
| Cured Appearance | Pale pink |
| Density (23°C) | 3.1 g/cm³ |
| Thermal Conductivity | 10.2 W/m·K |
| Thermal Resistance | 17 mm²·K/W (BLT: 140 μm) |
| Minimum BLT @ 100 N | 140 μm |
| Hardness (Type E) | 10 |
| Hardness (Shore 00) | 30 |
| Dielectric Strength | 15 kV/mm |
| Volume Resistivity | 3 × 10¹³ Ω·cm |
| Low Volatile (D4–D10) | < 100 ppm |
| BLT vs Force (200 N) | 131 μm |
| BLT vs Force (300 N) | 108 μm |
| BLT vs Force (500 N) | 98 μm |
| BLT vs Force (1000 N) | 85 μm |
| BLT vs Force (1500 N) | 73 μm |
