GLUDITEC UV5103H Dual cure adhesive for Optical Component is a photo-curing cationic type and thermal-curing adhesive for the optical component. This product can be pre-cured with UV light then thermal cured to develop outstanding adhesion properties, thermal-shock resistances and low shrinkage. For the special performance and reliability of this product, it is applied in various fields, such as C-MOS and it also provide low shrinkage and water absorption. With low viscosity and high thixotropic, this product is suited for dispensing equipment.
FEATURES of GLUDITEC UV5103H Dual cure adhesive for Optical Component
- This product demonstrates outstanding adhesion properties on glass, metals and It is also suited for LCP525, PC (GF) and FR4 substrates bonding.
- This product exhibits lower water permeability which can effectively resist
- The retained strength of this product after environmental test experiments is still greatly high
- This product is solvent-free and low-pollution
- This product complies to the 2011/65/EU RoHS
- This product complies to chlorine < 900ppm, bromine <900ppm, chlorine + bromine < 1500ppm.
About Prostech
Prostech offers specialty materials (adhesives, tapes, thermal interface materials, insulating materials, sealants, PCB protection materials, …) along with manufacturing solutions. We proudly serve a wide range of industries and are an authorized distributor for leading global manufacturers of industrial materials and equipment. Our product range is designed to deliver customized solutions that address each customer’s unique needs.
With years of experience and a successful project history, we are confident in our ability to provide comprehensive material solutions. These solutions effectively tackle the challenges manufacturers face. To explore our full product catalog, simply click here. Our dedicated team is ready to assist with:
- Provide quotation, sample, TDS/MSDS, and technical consultation
- Testing sample quality and verifying product compatibility in our laboratory
- Customizing material formulas for special applications
- Adapting product sizes, quantities, and packaging to meet specific needs
- Offering expert advice on suitable equipment and automation processes
- Delivering technical training and on-site support for optimal product use
Moreover, Prostech ensures the safe and accurate global delivery of all materials, including “dangerous goods”, in compliance with legal regulations. For personalized technical support or to receive a quotation, please contact us today.
TYPICAL UNCURED PROPERTIES
|
Properties |
UV5103H |
|
Appearance |
Liquid |
|
Color |
Milky |
|
Viscosity *25°C, cps, S14, 50 rpm |
7,600 ~ 11,300 |
|
Thixotropic Index |
5.2 |
|
Specific Gravity |
1.53 |
TYPICAL CURING PROPERTIES
|
Properties |
UV5103H |
|
Pot Life, 25°C, days |
3 |
|
Curing condition 1, UV light |
|
|
Recommended Wavelength, nm |
310 – 365 |
|
Recommended Light Intensity, mW/cm2 |
> 50 |
|
Recommended Light Energy, mJ/cm2 |
3,000 ~ 6,000 |
|
Curing condition 2, Heat cure |
|
|
800C 900C 1000C 1200C 1300C |
60 min 45 min 30 min 15 min 10 min |
TYPICAL CURED PROPERTIES
|
Properties |
UV5103H |
|
Glass Transition Temp., (TMA), °C |
125 |
|
Glass Transition Temp., (DMA), °C |
186 |
|
CTE (*4) (<Tg), μm/m/°C |
51 |
|
CTE (*4) (<Tg), μm/m/°C |
116 |
|
Durometer Hardness, Shore D |
88 |
|
Specific Gravity |
1.67 |
|
Volume Shrinkage, % |
1.02 |
|
Water Absorption Ratio (25°C/24hr), % |
0.44 |
|
Water Absorption Ratio (80°C/24hr), % |
2.43 |
|
Water Absorption Ratio (97°C/1.5hr), % |
1.15 |
|
Degradation Temp (TGA 100C / min), 0C |
368 |
|
Young’s modulus, GPa |
6.5 |
|
Elongation, % |
2 |
