Dymax MD® Medical Device Adhesive 1180-M-UR is designed for rapid bonding of plastics and metals typically used in the manufacture of medical devices. This product fluoresces bright red under low-intensity black light (365 nm). The bright red fluorescence contrasts extremely well on plastics that naturally fluoresce blue in color (like PVC), and greatly assists with visual inspection of the bond-line area. Dymax MD® Medical Device Adhesives contain no nonreactive solvents and cure upon exposure to light. Their ability to cure in seconds enables faster processing, greater output, and lower processing costs. When cured with Dymax light-curing spot lamps, focused-beam lamps, or flood lamps, they deliver optimum speed and performance for medical device assembly. Dymax lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with RoHS directives 2015/863/EU.
FEATURES
- UV/Visible Light Cure
- Ultra-Red™ Fluorescing
- Moisture Resistant
- Adhesion to a Wide Variety of Substrates
APPLICATIONS
- Needle Bonding
- Reservoirs
- Transducer Assembly
- Medical Potting
|
UNCURED PROPERTIES * |
||||
|
Property |
Value |
Test Method |
||
|
Solvent Content |
No Nonreactive Solvents |
N/A |
||
|
Chemical Class |
Acrylated Urethane |
N/A |
||
|
Appearance |
Clear Transparent Liquid |
N/A |
||
|
Soluble in |
Organic Solvents |
N/A |
||
|
Density, g/ml |
1.05 |
ASTM D1875 |
||
|
Viscosity, cP (20 rpm) |
150 (nominal) |
ASTM D1084 |
||
|
|
||||
|
CURED MECHANICAL PROPERTIES * |
||||
|
Property |
Value |
Test Method |
||
|
Durometer Hardness |
D70 |
ASTM D2240 |
||
|
Tensile at Break, MPa [psi] |
17 [2,500] |
ASTM D638 |
||
|
Elongation at Break, % |
66 |
ASTM D638 |
||
|
Modulus of Elasticity, MPa [psi] |
330 [48,000] |
ASTM D638 |
||
|
|
||||
|
OTHER CURED PROPERTIES * |
||||
|
Property |
Value |
Test Method |
||
|
Refractive Index (20˚C) |
1.51 |
ASTM D542 |
||
|
Boiling Water Absorption, % (2 hr) |
3.5 |
ASTM D570 |
||
|
Water Absorption, % (25˚C, 24 hr) |
1.5 |
ASTM D570 |
||
|
Linear Shrinkage, % |
0.8 |
ASTM D2566 |
||
|
* |
Not Specifications |
|
|
|
|
N/A |
Not Applicable |
|
|
|
|
ADHESION |
|
|
Substrate |
Recommendation |
|
ABS acrylonitrile-butadiene-styrene |
? |
|
PC polycarbonate |
? |
|
PC/ABS blend of PC and ABS |
? |
|
PET poly(ethylene terephthalate) |
o |
|
PI polyimide |
? |
|
PMMA poly(methyl methacrylate) |
? |
|
PP polypropylene |
st |
|
PS polystyrene |
? |
|
PU polyurethane |
? |
|
PVC poly(vinyl chloride) |
? |
|
SAN styrene-acrylonitrile |
o |
|
TPU thermoplastic polyurethane |
? |
|
SS stainless steel |
? |
