Product Description
Elantas CONAP® CE-1170 is a solvent-based, single component, fast curing, acrylic resin solution. It can be applied by brushing, dipping, or spraying.
Features and benefits of CONAP® CE-1170
- QPL listed for MIL-I-46058C for Type AR
- IPC-CC-830B qualified
- Halogen-free (IEC 61249-2-21)
- Excellent hydrolytic stability
- UL94 V-0 listed
- Flexible coating
- Excellent adhesion to phenolic and epoxy-glass laminates
- Excellent reparability
- Tracer dye added for inspection under UV lighting
Applications area of CONAP® CE-1170
CONAP® CE-1170 provides an excellent electrical and moisture barrier for thin film applications on components and printed circuit boards.
Application / Curing Schedule
- Performance of the CE-1170 cured film is dependent on process controls used in application of the coating. Cleanliness of the substrate is a major factor in promoting adhesion and preventing under-film corrosion. Assemblies must be clean, oil-free, and dry.CE-1170 can be applied by spraying, dipping, or brushing. If viscosity reduction is desired, dilutions of 10 – 20% by weight with CONAP® S-13 Solvent are recommended for most applications. For some spray applications, dilutions up to 1:1 by volume may be required to avoid cobwebbing.
- A minimum of two coats of CE-1170 are recommended for optimal protection. A total cured film thickness of 2 ± 1 mils is recommended. CE-1170 may be recoated after the previous film is tack-free.
- Curing of the film is dependent upon the evaporation of the solvents. The coating will typically dry tack-free in 15 minutes and cure in 24 hours at 25°C / 77°F. Alternatively, dry tack-free can be completed in 10 minutes and cure can be completed in 45 minutes at 60°C / 140°F.
See all Elantas Product Here
About Prostech
Prostech offers specialty materials (adhesives, tapes, thermal interface materials, insulating materials, sealants, PCB protection materials, …) along with manufacturing solutions. We proudly serve a wide range of industries and are an authorized distributor for leading global manufacturers of industrial materials and equipment. Our product range is designed to deliver customized solutions that address each customer’s unique needs.
With years of experience and a successful project history, we are confident in our ability to provide comprehensive material solutions. These solutions effectively tackle the challenges manufacturers face. To explore our full product catalog, simply click here. Our dedicated team is ready to assist with:
- Provide quotation, sample, TDS/MSDS, and technical consultation
- Testing sample quality and verifying product compatibility in our laboratory
- Customizing material formulas for special applications
- Adapting product sizes, quantities, and packaging to meet specific needs
- Offering expert advice on suitable equipment and automation processes
- Delivering technical training and on-site support for optimal product use
Moreover, Prostech ensures the safe and accurate global delivery of all materials, including “dangerous goods”, in compliance with legal regulations. For personalized technical support or to receive a quotation, please contact us today.
Typical Properties of Material as Supplied
|
Property |
Conditions |
Value |
Units |
|
Viscosity |
25°C / 77°F |
400 |
cP |
|
Specific Gravity |
25°C / 77°F |
0.95 |
|
|
Appearance |
|
Amber, slight haze |
|
|
Solids Content |
135°C for 45 min |
31 |
% |
|
Flash Point |
ASTM D93 |
13 55 |
°C °F |
