When dispensing high viscosity materials, after stopping putting pressure onto the surface of liquid, the materials would be able to continue pouring out due to the remaining air pressure. As a result, it would lead to some problems regarding material consumption or not be able to control the quantity of dispensing fluid.
Our Suck-back valve would prevent tunneling and dripping effect. This helps you achieve consistent deposits and allows users to dispense virtually everything inside the syringe barrel reservoir — reducing fluid waste and operating costs.
FEATURES:
- High dispensing precise, easy to adjust finely.
- It is an applied suck-back type mechanism so that minimizes removing dripping from remaining pressure after closing.
- Applied materials: Grease, Silicone, Oil, Epoxy
SPECIFICATION:
Model | BV-396 |
Operating type | Suck-back |
Maximum dose | 40L/min |
Viscosity range | 1~500,000cps |
Operating air pressure | 5kgf/㎠ |
Maximum fluid charge pressure | 150kgf/㎠ |
Maximum number of cycles | 150회/min |
Air operating port | PT3/8″ |
Material of dosing part | AL 6061 |
Weight | 300g |