PERMABOND 910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. PERMABOND 910 will cure to a fixture strength in 10 seconds on most surfaces and strength develops rapidly. The adhesive was designed specifically for the bonding of metal surfaces, and provides excellent bond strength to steel, aluminum and most metal surfaces. The methyl cyanoacrylate will also adhere well to a wide variety of other materials including most plastics and rubbers.
FEATURES:
- Excellent adhesion to metal surfaces
- Fast cure
- Easy to apply and dispense
- No mixing required
- Approved to MIL-A-46050C Type I Class 2 (existing designs)
- CID A-A-3097 Type I Class 2 (new designs)
APPLICATIONS:
- Filter Bonding
- Rubber gasket bonding onto filters
- Wire Tacking
- Bonding Copper Wire to Ceramic
| Chemical composition | Methyl cyanoacrylate |
| Appearance | Colorless |
| Viscosity @ 25°C | 70-90 mPa.s (cP) |
| Specific gravity | 1.1 |
| Maximum gap fill | 0.15 mm 0.006 in |
| Fixture/handling time (0.3 N/mm² shear strength is achieved) | 10-15 seconds (Steel) 10-15 seconds (Buna N Rubber) 10-15 seconds (Phenolic) |
| Full strength | 24 hours |