Multi-Cure® 984-LVUF

Due to PFAS problems, Multi-cure 984-LVUF formulation will be changed, please see our alternative solution here: DSL 1600 E-FLZ

Multi-Cure 984-LVUF is a highly fluorescing, single-component, 100%-solids conformal coating specifically formulated for rapid room-temperature cure when exposed to UV light. 984-LVUF retains high fluorescence after curing. Thin-layer coatings cure almost instantly to a depth of 7 mils and fluoresce upon exposure to “black” light. Multi-Cure 984-LVUF also exhibits adhesion to a variety of metal, ceramic, and glass-filled epoxy surfaces. 984-LVUF is a moderately low-viscosity coating which can be cured by exposure to UV light and secondarily cured with heat for shadowed areas on densely populated circuit boards. Dymax Multi-Cure materials contain no nonreactive solvents and cure upon exposure to light. Their ability to cure in seconds enables faster processing, greater output, and lower processing costs. When cured with Dymax light-curing spot lamps, focused-beam lamps, or flood lamps, they deliver optimum speed and performance for conformal coating. Dymax lamps offer the ideal balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the RoHS2 directives 2015/863/EU and 2011/65/EU.

Features:

• UV/Visible Light Cure
• MIL-I-46058C Listed
• Secondary Heat Cure
• IPC-CC-830-B Approved
• Solvent Free
• UL 746C Qualified
• One Part, No Mixing or Dilution Required
• UL 94V-0 Recognized
• Flexible for Enhanced Thermal Shock Performance