Invisisil SN1001 is a two-component, high elongation silicone gel used for optical bonding applications. This product will typically provide tack-free time at room temperature in ~10 minutes to a soft, tacky gel with the addition of a curing agent. The soft nature and cushioning effect of this product offer excellent protection of electronic assemblies from external humidity, mechanical shock, and vibration.
FEATURES:
- Convenient 1:1 mix ratio by weight /volume
- Middle viscosity – easily pourable
- Room temperature curability
- Soft, tacky, and sticky gel
- Shock absorption and protection of delicate mechanical components from vibration
- Absence of reactive by-products that may contribute to corrosion
APPLICATIONS:
- Optical bonding
- Electronic screen displays or touch-screen modules, particularly those used in harsh environments
Uncuredproperties
A | B | |
Appearance | Transparent | Transparent |
Viscosity (23degreeC) | 1.0 Pa.s | 1.0 Pa.s |
Mix ratio by weight/volume | 1:1 | |
Refractive Index | 1.4 | |
Specific gravity (23dereeC) | 0.97 |
0.97 |
Percent transmittance (1mm thickness 400nm) % | > 99 |
Cured properties (0.5hr@60degreeC)
Appearance | Transparent gel |
Penetration | 40 |
Lap shear strength (Thickness 0.15mm) MPa | 0.5 |
Youngs modulus | 0.015 MPa |
Volume resistivity | 1.0×10^7 {1.0×10^15} MΩ・m{Ω・cm} |
Dielectric strength | 18 kV/mm |
Dielectric constant (60Hz) | 2.7 |
Dielectric loss (60Hz) | 0.002 |
Thermal conductivity | 0.17 W/mK |
Haze % | 0.1 |