The conformal coating PETERS ELPEGUARD® SL 1307 FL-T is a physically drying 1-pack conformal coating based on modified acrylate resins.
The colorless transparent, fluorescent conformal coating ELPEGUARD® SL 1307 FLZ-T is an ultra-thixotropic adjustment of the conformal coating ELPEGUARD® SL 1307 FLZ/2 which can be easily and precisely applied by means of a dispenser. This way, dams can be built around connectors, components, and pads to prevent the penetration or spreading of a subsequently applied conformal coating (dam and fill). The liquid flow after application ensures that component leads are completely surrounded.
The conformal coating ELPEGUARD® SL 1307 FLZ-T can be removed with the thinner V 1307 FLZ/2 for repair purposes and reapplied later.
FEATURES:
- Due to the ultra-thixotropic adjustment, ideal for dispenser application of dams to limit the application area of a subsequent conformal coating (dam and fill)
- Due to the special solvent composition virtually no risk of incipient dissolution of components and marking inks
- Very good ageing and yellowing resistance
- Protects against corrosion on account of the good resistance to moisture and condensation
- Can be completely removed by means of the thinner V 1307 FLZ/2 for repair purposes.
- ROHS
- Meets requirements per IPC-CC-830B
| Colour/appearance | colourless transparent, fluorescent |
| Solids content, ISO 3251, 1 h, 125 °C [257 °F], 1 g weighed quantity | 40 ± 2 % |
| Viscosity* at 20 °C [68 °F], ISO 3219 | 1 250 ± 500 mPas |
| Density at 20 °C [68 °F], ISO 2811-1 | 1.00 ± 0.05 g/cm³ |
| Flexibility | IPC-CC-830B, 3.5.5 |
| Glass transition temperature Tg | approx. -4 °C [24.8°F] |
| Coefficient of thermal expansion (CTE) | 160 ppm/°C ≤ RT |
| Dielectric strength | 22 kV/mm |
| Specific volume resistivity | 3.5 x 1012 Ohm x cm |
| Surface resistance | 2.6 x 1012 Ohm |