• Products
    • By Application
      • Abrasives
      • Adhesives
      • Cleaner Degreaser
      • Component Reinforcement
      • Conformal Coatings
      • Curing System
      • Dispensing System
      • Elastomeric materials
      • EMI Shielding
      • Impregnating resin
      • Labelling Printing
      • Low Pressure Molding Material
      • Masking
      • Metrology Equipment
      • Other Industrial Materials
      • Plasma Treatment
      • Potting – Encapsulant
      • Primer and Adhesion Promoter
      • Robotic & Automation
      • Sealant & Gasketing Liquid
      • Soldering
      • Tape
      • Thermal Management
    • By Market
      • Battery
      • Consumer Products
      • Electrical
      • Electronics
      • General Industrial
      • Handphone
      • Lighting
      • Medical
      • Packaging
      • Power
      • Semiconductor
      • Textile & Garment
      • Transportation
    • By Manufacturer
      • 3M
      • AETP
      • Almit
      • Banseok
      • Bostik
      • Cartell
      • Chemtronics
      • Daheng
      • Dymax
      • Elantas
      • Gluditec
      • H. B. Fuller
      • Henkel
      • Hexagon
      • Huntsman
      • ITW Performance Polymers
      • Jowat
      • Kuka
      • Lamieux
      • Markem imaje
      • Medmix
      • Momentive
      • Nordson
      • Permabond
      • Peters
      • RedRing Solder
      • Rogers
      • Shenmao
      • Shenzhen HFC
      • Stockmeier
      • Sulzer
      • T-Global
      • Techspray
      • Vietape
      • Weldtone
  • Solutions
    • 2K Meter-mixing and Dispensing System
    • 3M Novec Alternative
    • Automated Guided Vehicles (AGVs) solution
    • Automation System
    • Cleaning and Degreasing
    • Conformal Coating Solution
    • EMI Shielding Solutions
    • Industrial Adhesive
      • Anaerobic Adhesive Solutions
      • Sealing & Gasketing
      • Structural Bonding Adhesive Solutions
    • Liquid Media Curing
    • Low Pressure Molding Solutions
    • Potting – Encapsulation Solutions
    • Printed Circuit Board Solutions
    • Single Component Dispensing System
    • Surface Treatment
    • Temporary Masking
    • Thermal Interface Materials Solutions
  • Industries
    • Automotive Industry
    • Battery Energy Storage System (BESS)
    • Construction
    • Electronics Industry
    • Furniture & Building Construction
    • Image Sensor & Camera Module
    • Medical
    • Motor Industry
    • Printed Circuit Board Solutions
    • Speaker
    • Sports and Fashion
    • Transformer
  • Resource
    • Blog
    • Glossary
    • Library
    • Video
  • Contact
Skip to content
site-logo

Search Result

  • Products
    • By Application
      • Abrasives
      • Adhesives
      • Cleaner Degreaser
      • Component Reinforcement
      • Conformal Coatings
      • Curing System
      • Dispensing System
      • Elastomeric materials
      • EMI Shielding
      • Impregnating resin
      • Labelling Printing
      • Low Pressure Molding Material
      • Masking
      • Metrology Equipment
      • Other Industrial Materials
      • Plasma Treatment
      • Potting – Encapsulant
      • Primer and Adhesion Promoter
      • Robotic & Automation
      • Sealant & Gasketing Liquid
      • Soldering
      • Tape
      • Thermal Management
    • By Market
      • Battery
      • Consumer Products
      • Electrical
      • Electronics
      • General Industrial
      • Handphone
      • Lighting
      • Medical
      • Packaging
      • Power
      • Semiconductor
      • Textile & Garment
      • Transportation
    • By Manufacturer
      • 3M
      • AETP
      • Almit
      • Banseok
      • Bostik
      • Cartell
      • Chemtronics
      • Daheng
      • Dymax
      • Elantas
      • Gluditec
      • H. B. Fuller
      • Henkel
      • Hexagon
      • Huntsman
      • ITW Performance Polymers
      • Jowat
      • Kuka
      • Lamieux
      • Markem imaje
      • Medmix
      • Momentive
      • Nordson
      • Permabond
      • Peters
      • RedRing Solder
      • Rogers
      • Shenmao
      • Shenzhen HFC
      • Stockmeier
      • Sulzer
      • T-Global
      • Techspray
      • Vietape
      • Weldtone
  • Solutions
    • 2K Meter-mixing and Dispensing System
    • 3M Novec Alternative
    • Automated Guided Vehicles (AGVs) solution
    • Automation System
    • Cleaning and Degreasing
    • Conformal Coating Solution
    • EMI Shielding Solutions
    • Industrial Adhesive
      • Anaerobic Adhesive Solutions
      • Sealing & Gasketing
      • Structural Bonding Adhesive Solutions
    • Liquid Media Curing
    • Low Pressure Molding Solutions
    • Potting – Encapsulation Solutions
    • Printed Circuit Board Solutions
    • Single Component Dispensing System
    • Surface Treatment
    • Temporary Masking
    • Thermal Interface Materials Solutions
  • Industries
    • Automotive Industry
    • Battery Energy Storage System (BESS)
    • Construction
    • Electronics Industry
    • Furniture & Building Construction
    • Image Sensor & Camera Module
    • Medical
    • Motor Industry
    • Printed Circuit Board Solutions
    • Speaker
    • Sports and Fashion
    • Transformer
  • Resource
    • Blog
    • Glossary
    • Library
    • Video
  • Contact
  • en
  • vi
  • cn
Home > Products > By Manufacturer > Devcon® 5 Minute® Epoxy 14270 50ml cartridge

Devcon® 5 Minute® Epoxy 14270 50ml cartridge

快速固化的通用型灌封胶

  • Product code: 14270/ DV14270
  • Manufacturer: ITW Performance Polymers
  • Package size: 2.5oz; 15oz; 9lb; 50ml/400ml cartridge; 25ml Dev-Tube
  • Shelf Life: 微信账号: lindabui08

Request Quote Request Sample
  • Description
  • Specification
  • TDS/MSDS
  • Related Article
  • Product Description
  • Features of Devcon® 5 Minute® Epoxy 14270
  • Application Instructions for Devcon® 5 Minute® Epoxy 14270
  • About ITW Performance Polymers
  • About Prostech

Devcon® 5 Minute® Epoxy 14270: In need of a quick and durable fix for your pipe infrastructure? Devcon® 5 Minute® Epoxy is your go-to solution for all repair and maintenance tasks. This fast-acting epoxy hardener offers a general-purpose adhesive that dispenses and mixes in seconds, providing efficient gap filling for a variety of uses. It dries in just 15 minutes and reaches full strength in an hour, making it perfect for urgent repairs. Our 5-minute, 2-part epoxy is both strong and resilient, ensuring long-lasting protection for your pipes against wear and damage. Protect your infrastructure with Devcon® 5 Minute® Epoxy and experience its exceptional bonding strength and flexibility today!

Product Description

Devcon® 5 Minute® Epoxy 14270 is a  rapid-curing, general purpose adhesive/encapsulant. It can bond well metals, fabrics, ceramics, glass, wood, and concrete (in combinations), 50 ml cartridge.

There is a wide range of sizes available, each with a specific part number as listed below:

14210 2.5 oz.
14630 9 lb.
DA051 400 ml cartridge
14250 25 ml Dev-Tube™
14270 50 ml cartridge
14200 15 oz.

Features of Devcon® 5 Minute® Epoxy 14270

Devcon® 5 Minute® Epoxy  has key features as the following:

  • Bonds rigid durable substrates such as metals, glass, ceramics, concrete and wood in all combinations
  • Forms a clear hard rigid bond self leveling liquid in minutes
  • Listed under NSN Stock#8040-00-264-6816:#8040-01-067-6126
  • Functional strength in 1 hour
  • 100% reactive, no solvents
  • Low viscosity (10,000 cps)
  • Open Time: 4-7 minutes
  • Fixture Time: 10-15 minutes
  • Color: Clear
  • Mix Ratio: 1:1
  • Working Time Min: 3
  • Working Time Max: 6
  • Fixture Time Min: 10
  • Fixture Time Max: 15

Application Instructions for Devcon® 5 Minute® Epoxy 14270

  • Apply mixed epoxy directly to one surface in an even film or as a bead.
  • Assemble with mating part within recommended working time.
  • Apply firm pressure between mating parts to minimize any gap and ensure good contact (a small fillet of epoxy should flow out the
    edges to display adequate gap fill.

About ITW Performance Polymers

ITW Performance Polymers is a global leader in the research, development, and manufacture of structural and semi-structural adhesives, grouting and chocking compounds, sprayable syntactic materials, and wear-resistant coatings and repair compounds. Their market-leading brands include:

  • Chockfast: Grouting and chocking compounds
  • Densit: Wear-resistant coating and grouting systems
  • Devcon: Wear-resistant coating and MRO solutions
  • Epocast: Chocking compounds
  • Insulcast: Potting and encapsulation solutions
  • Korrobond: Backing compounds
  • Permatex: MRO solutions
  • Plexus: Adhesive solutions
  • Spraycore: Sprayable syntactics and specialty products

See All ITW PP Here

About Prostech

Prostech offers specialty materials (adhesives, tapes, thermal interface materials, insulating materials, sealants, PCB protection materials, …) along with manufacturing solutions. We proudly serve a wide range of industries and are an authorized distributor for leading global manufacturers of industrial materials and equipment. Our product range is designed to deliver customized solutions that address each customer’s unique needs.

With years of experience and a successful project history, we are confident in our ability to provide comprehensive material solutions. These solutions effectively tackle the challenges manufacturers face. To explore our full product catalog, simply click here. Our dedicated team is ready to assist with:

  • Provide quotation, sample, TDS/MSDS, and technical consultation
  • Testing sample quality and verifying product compatibility in our laboratory
  • Customizing material formulas for special applications
  • Adapting product sizes, quantities, and packaging to meet specific needs
  • Offering expert advice on suitable equipment and automation processes
  • Delivering technical training and on-site support for optimal product use

Moreover, Prostech ensures the safe and accurate global delivery of all materials, including “dangerous goods”, in compliance with legal regulations. For personalized technical support or to receive a quotation, please contact us today.

产品型号 14270 颜色 淡琥珀色
包装规格 50毫升 应用市场 一般工业
固化条件 室温固化 单双组份 双组份
体积比 1:1 重量比 1:1
化学成分 环氧树脂 邵氏硬度 85 D
粘度 10000cps 操作时间 3 to 6min
固化时间 12h @ 22.2 °C 工作温度 -40 to 93.3 °C
剪切强度 1,900 剥离强度 2 to 3 pli
介电强度 490 V/mil 延展率 1%
闪点 204.4 °C 典型用途 粘结金属,织物,陶瓷,玻璃,木材和混泥土

TDS:Download

Get MSDS

    Leave your information via Form, our Technical Support Team will contact you shortly!

    Carpet Adhesives Solution for Automotive & Flooring
    https://prostech.vn/carpet-adhesives-solution-for-automotive-flooring/

    Meeting Industry Demands with High-Performance Carpet Adhesives1. Keep production lines running smoothly2. Improve end-of-life recyclability3. Solvent-Free, Environmentally Friendly Technologies4. Prioritize

    Reactive Hot Melt Adhesives (PUR Hot Melt)
    Adhesive Solutions for Automotive Interior Lamination
    https://prostech.vn/adhesive-solutions-for-automotive-interior-lamination/

    Trends & Challenges in Automotive Interior Lamination Adhesive Solutions for Interior Lamination1. Reactive Hot Melt Adhesives (PUR Hot Melt)2. Pressure

    Paint Preparation
    Abrasives for Automotive Manufacturing & Repair
    https://prostech.vn/abrasives-for-automotive-manufacturing-repair/

    Key Applications of Abrasives for automotive1. Metal Preparation & Cutting2. Surface Finishing & Smoothing3. Paint Preparation4. Polishing & BuffingWhy Abrasives

    Heat Transfer Fluids (HTFs) for Industrial Cooling
    https://prostech.vn/heat-transfer-fluids-htfs-for-industrial-cooling/

    What Is a Coolant?EG vs PG-Based Heat Transfer Fluids Technical Fluid Requirements: Selecting the Right Coolant Heat Transfer Fluids (HTFs),

    Similar Products

    • HumiSeal® UV23 - Prostech

      HumiSeal® 2E16 Unfilled Epoxy Encapsulation

      See details
    • HumiSeal® UV23 - Prostech

      HumiSeal® 2E42T-B Thermally Conductive Epoxy Encapsulant

      See details
    • HumiSeal® UV23 - Prostech

      HumiSeal® 2UV10

      See details
    • HumiSeal®-2A14-U

      HumiSeal® 2A14-U Polyurethane

      See details
    Devcon® 5 Minute® Epoxy 14270 50ml cartridge

      Leave your information via Form, our Technical Support Team will contact you shortly!

      Devcon® 5 Minute® Epoxy 14270 50ml cartridge

        Leave your information via Form, our Technical Support Team will contact you shortly!

        Devcon® 5 Minute® Epoxy 14270 50ml cartridge

          Leave your information via Form, our Technical Support Team will contact you shortly!

          Devcon® 5 Minute® Epoxy 14270 50ml cartridge

            Leave your information via Form, our Technical Support Team will contact you shortly!

            Specialty Materials & Manufacturing Solutions

            • Home
            • Products
            • Solutions
            • Industries
            • Resource
            • Contact

            follow us

            © 2021 Prostech. All rights reserved.

            Asking for Product Information and Technical Consultant

              Leave your information via Form, our Technical Support Team will contact you shortly!