Almit Flux Agents; The perfectly matched supplement for production and repair purposes. All Almit flux agents” properties correspond to those of all other Almit products, the composition of which eliminates crystallization. This is one of the preconditions to be met for applications in the aerospace industry including the NASA Space Shuttle
FEATURES:
- Flux agent “No clean”
- Flux agent L1 classified
- Can be applied with a flux pen.
APPLICATIONS:
- Support soldering
| State | Low viscosity liquid | ||
| Colour | Plum colour | ||
| Specific | Gravity 0.821 + 0.005 | ||
| Solids Content | 5 – 15 % | Depends on Type | |
| Dryness | Pass | ||
| Chlorine Content | 0.00 % | by Ionchromat-analyzer | |
| Copper Plate Corrosion Test | Pass | JIS-Z-3197 | |
| Insulating Resistance | Normal State | > 1 x 10^13 Ω | JIS-Z-3197 Wave Soldering ( 250°C) on Glass-Epoxy board, Pattern Distance 0.3mm |
| After being held in conditions of High Humidity | > 1 x 10^12 Ω | ||
| Humidity Resistance at a High Voltage | Normal State | > 1 x 1013 Ω | JIS-Z-3197 Wave Soldering ( 250°C) on Glass-Epoxy board, Pattern Distance 0.3mm |
| After being held in conditions of High Humidity | > 1 x 1012 Ω | ||
| Copper Mirror Corrosion Test | Pass | MIL-F-14256E | |
| Solution Resistance | > 100,000 Ω cm | MIL-F-14256E | |
| Spreadability | > 80 % | MIL-F-14256E | |
| Solvent | Isopropyl Alcohol | ||
| Flux Type | L1 | J-STD-0004 | |