Scotch Brand Insulating Sprays are electrical grade, fast drying sealers and insulators in a pressurized can. These sealers protect surfaces against weather, moisture, corrosion, oil, alkalies and acids. The sprays can afford easy access to hard-to-reach spots.
FEATURES:
- Electrical-grade, fast-drying sealer in a pressurized can
- Safeguards surfaces from weather, moisture, corrosion, oil, alkalis and acids
- Use as a general-purpose sealer or for touch-up insulation on motor windings and frames
- RoHS 2011/65/EU Compliant
APPLICATIONS:
- Use Insulating Spray sealer to spray over insulation on wire and cable splices, as a general-purpose sealer or for touch-up insulation on motor windings and frames.
- Precautionary and first aid information for this product may be found in its Material Safety Data Sheet and on the product container.
| General Properties | Typical Value |
| Dielectric Strength (V/mil) | 850 |
| Tack Free Time 77˚F (25˚C) 40˚F (4˚C) | 15 minutes 30 minutes |
| Gardner Impact Strength (in-lbs.) | 60 |
| Hardness (pencil) | 4B |
| Propellant | Iso-butane and propane |
| % Solids | 15% (approximately) |
| Solvents | Xylene, M.E.K., Acetone |
| Base | Alkyd Resin |
| Flash Point | -50˚F (-46˚C) |
