Permabond® LH150 Pipe Sealant with PTFE is designed for sealing and locking tapered metal pipe threads and fittings. It is ideal for stainless steel and other passive metals. Instant sealing of up to 1000 psi is achieved upon limited hand tightening. After cure, the sealing capability is up to the burst rating on the typical pipe. The low locking strength allows easy disassembly.
UL Classification:
Permabond LH150 is classified by Underwriters Laboratories Inc. ® for use in devices handling gasoline, petroleum oils, and natural gas (pressure not over 100 psig) propane and butane not exceeding 2 in. 66G9.
FEATURES AND BENEFITS
- Full cure seal to the burst rating of pipe
- Easy to use and apply
- Directional freedom
- Does not contain solvents
- Excellent chemical and temperature resistance
- Cures at room temperature
- Will not shred, tear or cause blockages.
Physical Properties of Uncured Adhesive
|
Chemical composition |
Methacrylate esters |
|
Appearance |
White |
|
Viscosity @ 25°C |
260,000 mPa.s (cP) |
|
Specific Gravity |
1.1 |
|
Particle Size |
<10µm |
Typical Curing Properties
|
Maximum gap fill |
0.5 mm 0.02 in |
|
Time taken to reach handling strength (M10 steel) @23°C |
2 hours* |
|
Full strength (M10 steel) @23°C |
24 hours |
|
Instant air pressure seal |
1,000 psi (hand assembled) 3,000 psi (10 in-lb on torque) |
Typical Performance of Cured Adhesive
|
Torque strength (M10 steel ISO10964) |
Break 6 N·m 50 in.lb Prevail 3 N·m 25 in.lb |
|
Shear strength (steel collar & pin ISO10123) |
7 MPa 1000 psi |
|
Coefficient of thermal expansion |
90 x 10-6 mm/mm/°K |
|
Thermal conductivity |
0.19 W/(m.K) |
