Home > Products > By Manufacturer > Banseok > BV-500T

BV-500T

  • Product code:
  • Manufacturer: Banseok
  • Package size:
  • Shelf Life:
Request Quote Request Sample

BV-500 is one of spray valve series which help to apply consistent coatings of low- to medium- viscosity fluids exactly where needed. Microliter to milliliter amounts can be reliably dispensed in round pattern with diameters from 7mm.

FEATURES:

  • Bv-500 is the valve only for spray. It controls spraying up to 7mm width at minimum.
  • Applied materials of BV-500: Flux, Oil, Ink, Grease, Bond, UV Coating, Acrylic Coating materials

APPLICATIONS:

  • General Spraying Application
  • Conformal Coating Process
 Model BV-500T
Operating type Needle off
Maximum dose 8L/min
Viscosity range 1~1,000cps
Operating air pressure 5kgf/cm²
Maximum fluid charge pressure 10kgf/cm²
Maximum number of cycles 240 times/min
Air operating port PT1/8″
Material of dosing part SUS 303
Material of driving part SUS 303
Weight 340g

Get MSDS

    Leave your information via Form, our Technical Support Team will contact you shortly!

    Carpet Adhesives Solution for Automotive & Flooring
    https://prostech.vn/carpet-adhesives-solution-for-automotive-flooring/

    Meeting Industry Demands with High-Performance Carpet Adhesives1. Keep production lines running smoothly2. Improve end-of-life recyclability3. Solvent-Free, Environmentally Friendly Technologies4. Prioritize
    Reactive Hot Melt Adhesives (PUR Hot Melt)
    Adhesive Solutions for Automotive Interior Lamination
    https://prostech.vn/adhesive-solutions-for-automotive-interior-lamination/

    Trends & Challenges in Automotive Interior Lamination Adhesive Solutions for Interior Lamination1. Reactive Hot Melt Adhesives (PUR Hot Melt)2. Pressure
    Paint Preparation
    Abrasives for Automotive Manufacturing & Repair
    https://prostech.vn/abrasives-for-automotive-manufacturing-repair/

    Key Applications of Abrasives for automotive1. Metal Preparation & Cutting2. Surface Finishing & Smoothing3. Paint Preparation4. Polishing & BuffingWhy Abrasives
    Heat Transfer Fluids (HTFs) for Industrial Cooling
    https://prostech.vn/heat-transfer-fluids-htfs-for-industrial-cooling/

    What Is a Coolant?EG vs PG-Based Heat Transfer Fluids Technical Fluid Requirements: Selecting the Right Coolant Heat Transfer Fluids (HTFs),