COVEN FP4001 is an advanced heat transfer fluid and the perfect alternative solution for 3M Novec 649, 3M Novec 612 & 3M FC-3284.
COVEN FP4001 is a dielectric heat transfer fluid, dedicated to 2-phase immersion or direct cooling systems. Its high electrical insulation properties allow it to immerse electronics & electrical devices under power in the fluid. The favorable characteristics of the product’s viscosity, density, and surface tension allow optimal surface contact, which contributes to a superior heat transfer performance.
COVEN FP4001 is formulated with safety in mind. It is non-toxic, has no mention of any EUH phrases, is non-flammable, and has no flash point. It also has fire extinguishing properties, which provide extra protection in case of fire.
FEATURES
- Ultra Low Global Warming Potential
- Non-ozone depleting
- The large margin of safety in use
- Low viscosity
- High molecular weight
- Low pour point
Download comparison table
3M Fluorinert FC 3284 with COVEN FP4001
3M Novec 649 & 612 with COVEN FP4001
| 3M Fluorinert FC 3284 | COVEN FP4001 |
Appearance | clear | clear |
Boiling point | 50 oC | 49 oC |
Freeze Point | -73 oC | -108oC |
Density (g/ml) | 1.71 | 1.6 |
Surface Tension (dynes/cm) | 13 | 10.8 |
Vapor Pressure (Pa) | 35700 | 40000 |
abs Viscosity (cps)/ kinetic viscosity cSt | 0.71/ 0.42 | 0.64 / 0.4 |
Heat of Vaporization (kJ/kg) | 105 | 88 |
Calculated critical temperature, oC | 161 | 169 |
Calculated critical pressure, MPa | 1.94 | 1.88 |
liquid thermal conductivity, W/mK | 0.062 | 0.059 |
Coefficient of Expansion (K-1) | 0.0016 | 0.0018 |
Dielectric Strength/constant | 40 kV/ 1.86@1KHz | >60 kV/ 1.8 @1KHz |
Volume resistivity | 7 x 10^15 Ohm-cm | 10^12 Ohm-cm |
Temperature Range | -60 ~ 60oC | 2 phases: 49oC |
ODP | 0 | 0 |
GWP | high | <1 |
Flash Point | no | no |
