LIQ. 4145-14H is a solvent-borne, one part adhesive based on nitrile rubber. LIQ. 4145-14H is a fast drying, high viscosity product that is resistant to oil and plasticizer migration. LIQ. 4145-14H does not need a curative, which allows for safer handling. The dried film provides a tough elastic bond suitable for upholstery applications. This product is typically used for bonding vinyl to flexible and rigid plastics, foam and metals for interior trim applications within the automotive, rail and aerospace markets. LIQ. 4145-14H bonds to a wide variety of materials, including aluminum, ABS, vinyl films and foams, urethanes, nitriles and natural and synthetic fabrics. This product is sold against the Boeing Spec BMS5-14H.
FEATURES
- Resistant to oil, plasticizer, water and detergents
- Bonds to a variety of substrates (e.g. vinyl, plastics, foam, metal, fabrics)
- Meets BMS 5-14 – BAC5010 Ty-40
APPLICATIONS
- LIQ. 4145-14H may be applied via brush or roll coat to clean and dry surfaces. Apply sufficient adhesive to each surface and allow to dry. Wipe one surface with MEK and bond with uniform pressure. An alternate method for application is to apply LIQ. 4145-14H to one surface and allow to dry for at least 20 minutes. Apply the product to the other surface and while still tacky (within 10 minutes) mate the two surfaces with firm, uniform pressure.
TYPICAL PHYSICAL PROPERTIES |
|
Description |
Results |
Polymer Base |
Nitrile |
Appearance |
Yellow-brown liquid |
Specific Gravity |
0.88 |
Total Solids |
29.5% |
Viscosity |
8,000 cP |
Solvent |
Acetone, MEK |
Flash Point |
-23°C |