PERMABOND® 2010 is a thixotropic, fast-setting cyanoacrylate particularly suitable for use on vertical and porous substrates. This material can be used on metals, plastics, elastomers, ceramics and wood.
FEATURES:
- Thixotropic dispensable semi-gel
- Fast cure
- Easy to apply and dispense
- 100% reactive, no solvents
- Maximum gap filling capability
APPLICATIONS:
- Used on metals, plastics, elastomers, ceramics and wood
Physical Properties of Uncured Adhesive
Chemical composition | Ethyl cyanoacrylate |
Appearance | Colourless |
Viscosity @ 25°C | 20rpm: 2,000-2,500 mPa.s (cP) 2rpm: 10,000-20,000 mPa.s (cP) |
Specific gravity | 1.1 |
Typical Curing Properties
Maximum gap fill | 0.5 mm / 0.02 in |
Fixture / handling time* (0.3 N/mm² shear strength is achieved) | 10-15 seconds (Steel) 10-15 seconds (Buna N Rubber) 10-15 seconds (Phenolic) |
Full strength | 24 hours |
Typical Performance of Cured Adhesive
Shear strength (ISO4587) | Steel 19-23 N/mm² (2800-3300 psi) Aluminium 7-9 N/mm² (1000-1300 psi) Zinc 10 N/mm² (1500 psi) ABS >6 N/mm² (900psi) SF** PVC >6 N/mm² (900psi) SF** PC >5 N/mm² (700 psi) SF** Phenolic 14N/mm² (2000 psi) |
Impact strength (ASTM D-950) | 3-5 kJ/m² (1.4-2.4 ft-lb/in²) |
Dielectric constant @10kHz | 2.5 |
Dielectric strength | 25 kV/mm |
Coefficient of thermal expansion | 90 x 10-6 mm/mm/°C |
Coefficient of thermal conductivity | 0.1 W/(m.K) |