Araldite 2012 is a rapid cure, multipurpose, two component, room temperature curing, high viscosity liquid adhesive of high strength and toughness. It is suitable for bonding a wide variety of metals, ceramics, glass, rubbers, rigid plastics, and most other materials in common use. It is a versatile adhesive for the craftsman as well as most industrial applications.
The adhesive ARALDITE 2012 provides dependable and established performance that can assist in decreasing production risks and complexities. This adhesive is qualified for aerospace use and can withstand radiation, allowing for quick bonding and rapid strength attainment with minimal contact pressure time. Additionally, ARALDITE 2012 can bond both metals and plastics, which streamlines inventory management. The curing time is brief, which accelerates production processes and creates long-lasting bonds.
Applicator Gun: 3M™ Scotch-Weld™ EPX Manual Applicators
FEATURES:
- Fast curing within 1 hour
- General purpose
- 1:1 mixing ratio
- Low shrinkage
- Bonds a variety of materials in common use, eg: metal, ABS…etc
- Tough and resilient
APPLICATION:
- Fitting widely into Electronic & electrical components bonding for magnet, metal;
- Applied into battery assembly and auto sensor assembly
CASE STUDY:
- Bonding primary and secondary train structures with Araldite 2012
- The ability to bond metals and plastics means this adhesive can be used for the entire application, instead of using several adhesives. The short curing time speeds up the entire production process resulting in time saved and long-lasting bonds.
| Property | 2012/A | 2012/B | 2012/Mix |
| Color | opaque | pale yellow | pale yellow |
| Specific gravity | 1.16-1.18 | 1.15-1.18 | ca 1.18 |
| Viscosity at 25°C (Pas) | 25-45 | 20-40 | typically 25-45 |
| Pot Life (100 gm at 25 C) | — | — | 5 – 8 minutes |
| Shelf Life | 3 years | 3 years | 3 years |