Consistent UV curing requires periodic monitoring of UV intensity or dose. The ACCU-CAL 150 radiometer is simple to operate and offers repeatable measurement of UV light.
The ACCU-CAL 150 can measure UV light up to 10W/cm² emitted from the stationary light-curing flood lamps or lamps used in conveyorized processes. This radiometer can be used to determine intensity (measured in mW/cm²) or total energy as derived from intensity and exposure time (measured in mJ/cm²). The ACCU-CAL 150 radiometer greatly simplifies both validating and monitoring a UV light-curing process.
FEATURES:
- Simple to operate
- PTB and NIST Traceable
- CE Marked
BENEFITS:
- Validating and maintaining a Light-Curing Process
- Measuring Transmission Rates through substrates
| Light Sources | UV light-curing flood lamps and conveyor systems |
| Spectral Sensitivity | 320 to 390 nm |
| Intensity Range | 10 mW/cm² to 10 W/cm² |
| Accuracy | ± 10%, ±5% typical |
| Resolution | Intensity (1 mW/cm²) Dose (1 mJ/cm²) |
| Calibration Period | 6 months |
| Operating Temperature Ranges | 0-75°C internal temperature; tolerates high external temperatures for short periods |
| Measurements | Peak intensity (mW/cm²) Dose (mJ/cm²) |
| Power Supply | Two (2) AAA batteries |
| Battery Life | 20 hours with display on (automatic shutoff after 2 mins) |
| Instrument Dimension | 4.60″ x 0.50″ (117 mm x 12.7 mm) |
| Instrument Weight | 10.1 ounces (289 gram) |
| Instrument Materials | Aluminum, stainless steel |