Home > Products > By Manufacturer > Permabond > Anaerobic Adhesives & Sealants > PERMABOND® F201 Anaerobic Retainer
PERMABOND® F201 Anaerobic Retainer Prostech Vietnam

PERMABOND® F201 Anaerobic Retainer

  • Product code: PERMABOND® F201 Anaerobic Retainer
  • Manufacturer: Permabond
  • Package size: 200ml
  • Shelf Life:

 

Request Quote Request Sample

Permabond® F201 is an anaerobic adhesive which has been developed to give excellent resistance to peel and impact forces. This toughening, combined with good adhesion to aluminium and copper alloys, makes it the first choice where relatively thin or lightweight components are being bonded which may be subject to “distortion” in service. It is also capable of resisting the thermal stresses that may be generated when bonding dissimilar surfaces. Permabond F201 is also suitable for contact with potable water.

FEATURES AND BENEFITS

  • Toughened
  • Very high strength
  • Ideal when bonding dissimilar materials         
  • Improved fatigue life
  • WRAS listed for contact with wholesome (potable) water

Physical Properties of Uncured Adhesive

Chemical composition

Acrylic

Appearance

Brown

Viscosity @ 25°C

2 rpm: 9,000mPa.s (cP)

20 rpm: 2,500mPa.s (cP)

Specific Gravity

1.0

UV fluorescence

No

Typical Curing Properties

Maximum gap fill

Maximum thread size

0.2 mm 0.008 in

M20 ¾”

Time taken to reach handling

strength (M10 steel) @23°C

15 minutes*

Time taken to reach working strength (M10 steel) @23°C

1 hour

Full strength (M10 steel) @23°C

24 hours

Typical Performance of Cured Adhesive 

Torque strength (M10 steel

ISO10964)

Break 28 N·m      250 in.lb

Prevail 30 N·m  260 in.lb

Shear strength (steel collar & pin ISO10123)

30 MPa 4400 psi

Coefficient of thermal

expansion

90 x 10-6 mm/mm/°C

Dielectric strength

11 kV/mm

Thermal conductivity

0.19 W/(m.K)

TDS:Download

Get MSDS

    Leave your information via Form, our Technical Support Team will contact you shortly!

    glass surface preparation in automotive manufacturing
    Guide to Prepare Glass Surfaces in Automotive Manufacturing
    https://prostech.vn/glass-surfaces-automotive-manufacturing/

    Manufacturing Challenges when Preparing Glass Surfaces 2. The Full Guide for Glass Surfaces Preparation in Automotive Manufacturing3. Adhesives Recommendation For Effective
    3M Neoprene High Performance Contact Adhesive 1357L
    3M™ Neoprene High Performance Contact Adhesive
    https://prostech.vn/3m-neoprene-high-performance-contact-adhesive/

    Product DescriptionKey Features Product Description The 3M™ Neoprene High Performance Contact Adhesive 1357 is a robust, industrial-grade contact adhesive formulated
    The Optimal Material for EV Sensors Encapsulation
    The Optimal Material for EV Sensors Encapsulation
    https://prostech.vn/the-optimal-material-for-ev-sensors-encapsulation/

    Materials & Challenges in EV Sensors EncapsulationOptimal Materials for EV Sensors Encapsulation3. Epoxy, Silicone, or Polyurethane: Choosing Right Material for
    Potting Materials for Advanced Smart Rings
    Potting Materials for Advanced Smart Rings Quality
    https://prostech.vn/potting-materials-for-advanced-smart-rings-quality/

    1. The Challenge: Why Traditional Potting Materials Fail in Smart Rings1.1. Bubble Formation in Potting1.2. Yellowing in Potting1.3. The Curing