Permabond® A134 is a high-strength anaerobic product designed for the permanent locking and sealing of metal parts. Its ‘non-drip’ formulation makes it suitable for use on larger fittings, coarse threads or for the renovation of assemblies where wide tolerances are expected due to damage or wear. A134 can extend the life of components by reducing the effects of corrosion in aggressive environments.
FEATURES AND BENEFITS
- Easy to apply Thixotropic
- Room temperature cure
- Very high strength
- Excellent chemical resistance
- WRAS listed for contact with wholesome (potable) water
Physical Properties of Uncured Adhesive
Chemical composition | Acrylic |
Appearance | Green |
Viscosity @ 25°C | 2 rpm: 70,000 mPa.s (cP) 20 rpm: 8,000 mPa.s (cP) |
Specific Gravity | 1.1 |
UV fluorescence | Yes |
Typical Curing Properties
Maximum gap fill Maximum thread size | 0.5 mm 0.02 in M80 3” |
Time taken to reach handling strength (M10 steel) @23°C | 15 minutes* |
Time taken to reach working strength (M10 steel) @23°C | 1 hour |
Full strength (M10 steel) @23°C | 24 hours |
Typical Performance of Cured Adhesive
Torque strength (M10 steel ISO10964) | Break 30 N·m 270 in.lb Prevail 50 N·m 450 in.lb |
Torque strength (M10 Zn plated ISO10964) | Break 25 N·m 220 in.lb Prevail 45 N·m 400 in.lb |
Shear strength (steel collar & pin ISO10123) | 21 MPa 3000 psi |
Coefficient of thermal expansion | 90 x 10-6 mm/mm/°C |
Dielectric strength | 11 kV/mm |
Thermal conductivity | 0.19 W/(m.K) |
