Product Description
Elantas CONAPOXY® FR-1080 is a two-component, unfilled epoxy potting system.
Features and benefits of CONAPOXY® FR-1080
- Class H (180°C) rated
- Long work life
- Elevated temperature cure
Application of CONAPOXY® FR-1080
Potting and encapsulation of electrical/electronic devices such as modules, transformers, and coils as well as strain sensitive applications
Application/Curing Schedule
Mix the CONAPOXY® FR-1080 Part A Resin and FR-1080 Part B Hardener in the ratio specified above until homogeneous. Components may be preheated up to 60°C if reduced viscosity is required. If hand mixing, degas at >27 in. Hg vacuum before use. Cure 4 – 16 hours at 120°C / 248°F and post cure 2 hours at 180°C / 356°F for maximum properties. The cure schedules above is based on time after the unit reaches the specified temperature and is a recommendation only. The user is responsible for determining the optimum cure conditions for his application.
Transportation/Storage
Store at or below 25°C / 77°F in a dry controlled environment out of direct sunlight. This material should be suitable for use stored under these conditions in the original sealed containers for
twelve (12) months from the date of shipment. Failure to store the product as recommended above may lead to deterioration in product performance. This product is sensitive to moisture and atmospheric humidity. Containers, once opened, should be used immediately or blanketed with dry air or nitrogen (CONAP® Dri-Purge) before resealing. Mix and degas individual components thoroughly, prior to use.
See all Elantas Product Here
About Prostech
Prostech offers specialty materials (adhesives, tapes, thermal interface materials, insulating materials, sealants, PCB protection materials, …) along with manufacturing solutions. We proudly serve a wide range of industries and are an authorized distributor for leading global manufacturers of industrial materials and equipment. Our product range is designed to deliver customized solutions that address each customer’s unique needs.
With years of experience and a successful project history, we are confident in our ability to provide comprehensive material solutions. These solutions effectively tackle the challenges manufacturers face. To explore our full product catalog, simply click here. Our dedicated team is ready to assist with:
- Provide quotation, sample, TDS/MSDS, and technical consultation
- Testing sample quality and verifying product compatibility in our laboratory
- Customizing material formulas for special applications
- Adapting product sizes, quantities, and packaging to meet specific needs
- Offering expert advice on suitable equipment and automation processes
- Delivering technical training and on-site support for optimal product use
Moreover, Prostech ensures the safe and accurate global delivery of all materials, including “dangerous goods”, in compliance with legal regulations. For personalized technical support or to receive a quotation, please contact us today.
Typical Properties of Material as Supplied
|
Property |
Conditions |
Value |
|
|
|
|
CONAPOXY® FR-1080 Part A Resin |
CONAPOXY® FR-1080 Part B Hardener |
|
Viscosity |
25°C / 77°F |
4,000 cP |
300 cP |
|
Specific Gravity |
25°C / 77°F |
1.03 |
1.23 |
|
Color |
|
amber |
dark brown |
|
Mix Ratio |
Parts by weight Parts by volume |
100 100 |
83 67 |
|
Flash Point |
ASTM D93 |
>94°C >201°F |
>94°C >201°F |
Typical Properties of Mixed Materials
|
Property |
Conditions |
Value |
Units |
|
Viscosity (initial) |
25°C / 77°F |
2,500 |
cP |
|
Work Life |
25°C / 77°F |
>2 |
hours |
|
Gel Time |
100°C / 77°F |
1 – 2 |
hours |
Typical Physical Properties
|
Property |
Test Method |
Conditions |
Value |
Units |
|
Shore Hardness |
ASTM D2240 |
25°C / 77°F |
D 90 |
|
|
Tensile Strength |
ASTM D412 |
25°C / 77°F |
8,200 |
psi |
|
Ultimate Elongation |
ASTM D412 |
25°C / 77°F |
2 |
% |
|
Tear Strength |
ASTM D412 |
25°C / 77°F |
250 |
pli |
|
Flexural Strength |
ASTM D790 |
25°C / 77°F |
12,800 |
psi |
|
Flexural Modulus |
ASTM D790 |
25°C / 77°F |
390,000 |
psi |
|
Compressive Strength |
ASTM D695 |
25°C / 77°F |
4,200 |
psi |
|
Linear Shrinkage |
ASTM D2566 |
25°C / 77°F |
1.4 |
% |
