CircuitWorks Conductive Pen CW2200MTP makes instant highly conductive silver traces on circuit boards. CW2200 is used in prototype, rework, and repair of circuit boards by linking components, repairing defective traces, and making smooth jumpers. The silver traces dry in minutes and have excellent adhesion to most electronic materials. Engineers, repair technicians, and manufacturers will find that the CircuitWorks Conductive Pen speeds project completion and cuts rework time.
FEATURES:
- Single component system
- High electrical conductivity
- Fast drying
- Highly adherent to circuit boards
- Operating temperature to 400F (205C)
TYPICAL APPLICATIONS: CircuitWorks Conductive Pen CW2200MTP may be used for electronics applications including:
- Circuit Trace Repair
- Solderless Linking of Components
- EMI Shielding
- Solderable Terminations
- Quick Prototype Modifications
Material | Silver Filled Polymer |
Silver Particle Size | 10-15 microns |
Color | Silver Gray |
Setting Rate | <2mm/hr |
Conductivity | 0.02-0.05 ohms/sq/mil 0.00005-0.000125 ohm cm |
Max. Temperature | 400ºF (205ºC) |
Tack-Free Time @ 25ºC | 3 to 5 minutes |
Cure Time @ 25ºC | 20 to30 minutes |
Solder Wetting | 2 to 3 seconds |
Electrical Conductivity | Excellent |
Adhesion | Excellent |
Flexibility | Good |
Chemical Resistance | Good |
Tip Diameters | MTP 0.8 mm (0.03 inches) STP 1.2 mm (0.05 inches) |
Shelflife | 16 months |