Integrated Semi-Automatic Dispensing System which enables the adhesive to be dispensed directly from cartridges with timed operation and high precision. This kind of dispensing system always meets the demand for time-saving, cost-effective and easy handling of user.
- TAD-101 is an Integrated Semi-Automatic Dispensing System which enables the adhesive to be dispensed directly from small package size, from 3cc to 55cc syringe barrel
- TAD-200S controller which integrated into TAD-101 system provides digital timing control for any hand-held applicators. Dispense time within the range of 0.01-99.99 sec is available.
- TAD-101 System uses the principle of inserting air into the liquid surface, to precisely control output by selecting time, pressure, needle size where the minimum level is 0.0001cc
SYSTEM COMPONENTS:
- Barrel adapter
- Top cap
- Barrel piston
- Barrel
- Needle
- Tip cap
- Stand – Barrel/ Cartridge Holder
- Controller TAD-200S
- Foot Switch/ Hand Switch
SPECIFICATIONS OF DISPENSING CONTROLLER
Model | TAD-200S |
Control Method | Electronic/ Pneumatic system |
Dispensing pressure | 0~10kg/cm² (Standard) 0~4kg/cm² (L: Option) 0~2kg/cm² (P: Option) |
Time range | 0.01 ~ 99.99 sec |
Interval timer | 0.01 ~ 3.99 sec |
Vacuum pressure | 0 ~ -350mmHg |
Out signal | Open connector, DC 24V 20mmsec (Relay), 100mmsec (Relay) |
Power source | AC220V 50/60Hz (AC100V 50/60Hz: Option) |
Power comsumption | 32W |
External Dimension & Weight | 232(W) x 186(D) x 81(H) mm, 2.7kg |